You say Tomato, I say Tomatoe. 73, Dick, W1KSZ
-----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Jim Brown Sent: Saturday, August 22, 2015 9:15 PM To: [email protected] Subject: Re: [Elecraft] K2 - KPA100 RS232 interface repair On Sat,8/22/2015 5:17 PM, Richard W. Solomon wrote: > It seems to me that using a DB-9 connector for non-RS232 uses is taking the Easy way out. There are numerous other connectors that could be used to alleviate any Misunderstanding. I see it quite differently. The K2 was a kit, designed to be built by mere mortals, not machines. The DB-series connectors are widely available from good industrial sources and are easy to work on. There's also the matter of panel real estate. Yes, there are other connectors, but I can't think of a decent alternative that fits the above objectives. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
