You can use VOX instead of PTT - and it is apparently working for you
right now.
With soundcard data modes, there is no harm in using VOX (unless you
have MIC + LINE set in the menu - and you should not).
There is no way you will start transmitting because of room sounds. The
only thing to watch out for is that the USB Audio Codec for the K3S is
not defined as the default soundcard for the operating system - if it
is, you will get "computer sounds" being transmitted on the data mode
portions of the bands, and that is not good for retention of your
license or the ire of fellow hams.
73,
Don W3FPR
On 8/26/2015 3:53 PM, MM6TGN wrote:
I have set in /out on these to USB Audio CODEC I have done as suggested
with the levels and when I no press TXMIT and ANS with the FLDIG I now get
4 bars with the 5th flashing this now appears to be stable.
Thi works both in test and normal mode. The Tx light goes on in normal mode
The difficulty now appears to be that FLdigi is not activating of
deactivating PTT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
