Warren,
His problem was in receive, not transmit. So I don't understand how the
drive level setting could have anything to do with it.
73,
Don W3FPR
On 8/29/2015 3:52 PM, Warren Merkel wrote:
Jim,
Did you check what the K3S power level displays when the KPA500 is in
Operate mode? It could be set for very low drive. I have mine set up to
lower the drive from 100w to 30w when the KPA500 goes from standby to
operate. If you have the setting for per band mode enabled, you will
need to check it on each band.
Warren, KD4Z
On 8/29/2015 12:06 PM, jim rogers wrote:
Good morning,
I have a new K3S, serial # 10195. All was going well until I hooked up
my KPA500 to the K3S using the Elecraft supplied aux cable (E850463).
In standby mode (on the KPA500) the audio level on the K3S is nice and
loud, BUT when I press the OPER button on the KPA500 the audio level on
the K3S all but disappears!
If I then press STBY on the KPA500, the audio level on the K3S returns
to loud. Only the E850463 cable connects between the two Elecraft
components.
The KPA500 is about 1 year old and has performed flawlessly to date. Do
I have a Firmware issue with the "older" KPA500 and the brand new K3S?
Thank you for any suggestion on how to resolve this issue.
Jim N4DU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
