I have RX xFIL set to "normal" in the menu so that the PBT control adjusts bandwidth. When I use a BW of 1.8 KHz or higher in SSB mode, everything looks good on a waterfall display. But when I reduce the BW to 1.7 KHz or lower, a chunk approximately 250 Hz wide and centered at 1500 Hz is removed from the waterfall display. I originally thought it was related to the roofing filters as the effect happened at the same time that FL2 was selected, but after I set the roofing filters to "not installed" so that FL1 was used for all bandwidths, the problems still occurs. Any suggestions would be appreciated.
KX3-K serial #1691 with latest production release firmware installed. The roofing filter option was ordered with the transceiver. 73, AL - VE3RRD ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
