Are you in USB mode or TX Data mode on the radio?
I use TX Data very successfully. And when I work AFSK I do switch to
ALT mode which would be LSB mode in TX Data. Otherwise, TX Data us a
USB mode. The nice thing about using TX Data mode is that it negates
the COMP and EQ values. When going back to SSB then the COMP and EQ
values are retained.
73
Bob, K4TAX
K3S s/n 10,163
On 9/16/2015 2:18 PM, KE1B wrote:
I had this working, but now can’t figure out how I did it, cuz it’s not working
again.
Running Windows 7, N1MM+, K3S connected via USB.
CW and SSB work fine, including macros.
On RTTY (MMTTY), if I hit any macro key, the radio keys up (PTT), but there is
no diddling. At that time, I see the characters being sent in the Digital
Window, and the XY scope is apparently showing my transmitted signal. I just
get a pure carrier.
On PSK (MMVARI), if I hit a macro key, the radio keys up (PTT), and the
characters show up in the Digital Window, but again there is apparently no
audio getting from the computer to the radio.
In the Configurer, I have selected the K3S Codec as the output device for the
radio.
I have tried lots of variations in ports and AFSK/FSK and such, to no avail.
What should I be checking?
Rich KE1B
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
