On Wed,9/16/2015 8:45 PM, Steve Lund wrote:
Check to make sure that the Mark frequency is the same on the K3 and MMTTY. The defaults are not the same. And make sure that the TX Mark frequency is the same as the RX frequency.
YES! That's a BIG one. If the K3 tones are not the same as the MMTTY tones, it will not TX.
I don't use MMVARI, but MMTTY has two .ini files that try very hard to set your tones to the 2125 pair. I like low tones. To beat that, you need to go into the directories where MMTTY is running, find those .ini files (plain text) and change all the default tones to what you want to use. The two files are mmtty.ini and userpara.ini The statements you're looking for are DefMarkFreq=2.125000e+03 It occurs about 10 times in userpara.ini, only once in mmtty.ini userpara.ini is the file that defines the many decoding options; when you cycle through them, all of those parameters, including the tone frequencies, gets reset.
If you have multiple instances of MMTTY, you need to edit these files in each directory.
73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
