Subject: Re: [Elecraft] On VHF & UHF radios
I added the 2 meter option for the KX3 and I was impressed with the ability to handle out of band pagers etc. I live next to a hospital and there , usually dirty pagers etx cause problems with other 144 gear I have but the KX3 combo really handles the strong 149/150 Mhz signals ,,, could use external amp for ssb but there pretty common and EZ to home brew Bob K3DJC On Wed, 16 Sep 2015 16:52:58 -0700 Jim Lowman <[email protected]> writes: > That could be, Bob. > > I should have phrased my question more specifically. > My intended use for such a transceiver would be weak-signal work. > > I had the 2m option for the K3 but, with its low power output, I > sold it > and bought a Kenwood TS-2000X to be dedicated to VHF/UHF operation. > However, this type of operation demands high power (at least 100w) > and > an antenna with high gain, so I would have to buy an external > amplifier > at any rate. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
