THis is what I did, but it seems to disable the K3S USB port.
I have the K3S RS232 setting set to USB; should that be 38400 instead?
Would USB still work?
73, Byron
On 09/25/2015 09:58 PM, Joe Subich, W4TV wrote:
In summary, I expect to connect PC-to-P3 via USB-DB9 and have only
the DC-power and IF-BNC between the K3S and the P3. DO I HAVE THAT
CORRECT?
No. If you plan to connect the computer to the K3S using the internal
USB port, you need to use the optional CBL3Y cable from Elecraft to
connect the P3 as documented on page 18 of the K3S Owner's Manual.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
