Fred, that's REALLY odd! Does your panel appear to have any sort of "lens" in front of the individual cells? Wonder how is one to put them to practical use .....
Mine are Kyrocera units about 10 years old and rated a just over 3A each. 73 Ken - K0PP On Sep 27, 2015 5:19 PM, "Fred Townsend" <fptowns...@earthlink.net> wrote: > Ken: > I would add the caveat that not all cells are wide angles like yours. After > maximum power aiming mine (Harbor Freight) are at 25% of rated power within > 15 minutes. That makes aiming them almost a full time job. > 73 > Fred, AE6QL > > -----Original Message----- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken G Kopp > Sent: Sunday, September 27, 2015 1:57 PM > To: elecraft@mailman.qth.net > Subject: [Elecraft] OT: Solar - Mostly for Wayne > > The following from a number of years experience as a power company > communications tech with mountain top solar radio repeater sites and a > long-time RV solar and wind power user. > > Mounting solar panels in a flat position may turn out to be the most > practical. The conventional way is to angle them towards the sun at an > angle equal to your latitude, but even at 46 degrees here in Montana the > difference in output between 0 and 46 degrees is only about 7%. Hardly > worth the trouble of dealing with the mechanics of angle mounting or > seasonal adjustment. > > At Wayne's lower latitude, this is even more the case. > > Our RV has 12A worth of panels and they're mounted flat on the roof. They > charge four Trojan T-145 6V > (440AH) golf cart batteries (via a regulator) and we've never run short of > power. BTW, the batteries have been in service for almost 12 years. > > There's a 1500W inverter for the TV, SatTV receiver, computer(s), etc. The > one thing we don't do is power the 1000W microwave oven via the inverter. > It requires > 90 amps from the batteries to operate the microwave and I hesitate to draw > that from the battery for long periods of time for fear of warping the > plates. > > I also have a small Air 403 windmill that mounts to the RV's rear bumper > that's good for 25A in a stiff breeze. > It also gets lots of interest from other RV'ers. Especially at the > Quartzite, AZ gathering. (:-) > > 73! > > Ken - K0PP > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message > delivered to fptowns...@earthlink.net > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
