Frank, ACC2 has two outputs: a keyline for the amp (always on), and a general-purpose programmable output (GPIO). The latter is what's controlled by the ACC2 IO menu entry. You can use this signal for various functions as described in the ACC2 IO menu entry.
When the amp is used with our custom KXPA100 interface cable, the ACC2 keyline signal is routed to the amp, and the GPIO signal is broken out to its own connector for your use. 73, Wayne N6KR On Sep 30, 2015, at 1:25 PM, frank <[email protected]> wrote: > > ACC2 = OFF appears to be a factory default. Why? > > Other rigs do not disable the amp keying line. Why was it neccessary to do > that in the KX3? > -- > Frank - K5DKZ > KX3 - 7550 > PX3 - 1143 > KXPA100 - 1566 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
