Ron, as far as I can tell this happens with manual PTT asserted any time
during the repeat CQ pause or during transmission. ESC is the only way
to interrupt the cycle or an actual canned transmission. This may not
be fixable, depending on the specifics of the K3 CAT messaging (i.e.
does it send a message when PTT is engaged by a footswitch?)
73, Pete N4ZR
Download the new N1MM Logger+ at
<http://N1MM.hamdocs.com>. Check
out the Reverse Beacon Network at
<http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.
On 10/12/2015 1:51 PM, Ron W3ZV wrote:
Trying to figure out a problem. I spent this weekend on the PA QSO
Party. I use the K3 DVR for CQ, MyCall and QSL, TU, QRZ messages,
activated by N1MM macros. When things slowed down I used repeat CQ. I
have a serial port activating PTT with canned messages and my
footswitch for live mic. This is my first outing with this setup. I
had previously used PTT via CAT control for canned messages.
My problem is that when I activated my foot switch close to the time
the repeat CQ was scheduled, I was interrupted by the CQ message when
I began to talk. If the repeat CQ was not imminent, no problem
I don't know if this was a PTT race condition, or a software problem
with the contest logger.
Any insight would be appreciated.
Ron W3ZV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
