Steve - I don't have a the CTL-B now, but did many years ago. The connection is very straight forward.,, but you did not state if you use an external keyer, or the keyer in the K3. If using an external keyer wire the paddle portion of the CTL-B for the connector required by the paddle input of your keyer. The output of the keyer will go to the KEY input of the K3, but you will want to use a 1/4" mono 'Y' cable (two female, to one male), so you can connect the straight key portion of the CTL-B in parallel with the line from the keyer.
If you are using the keyer built into the K3 it is still very straight forward. Wire the paddle to a 1/4" stereo plug, and plug it into the PADDLE input of the K3. Wire the straight key portion of the CTL-B to a 1/4" plug and plug it into the KEY input of the K3. Best of luck. Dave - K9FN On Wed, Oct 14, 2015 at 5:18 PM, Steven Bertsch <[email protected]> wrote: > Anyone using Brown Brothers CTL-B paddles/key with a K3? If so, how did > you connect it? > > Steve, K6SAB > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
