Gordon,
Have you checked the internal jumpers to be sure it is properly plugged
for use with the K3.
Download the newest KRC2 manual if the one you have does not include use
with the K3 - see page 23.
You have the choice of using the AUXBUS (if you only want the band data).
If you are using the serial port, the baud rate on the K3 and the PC
application must be limited to 19,200 or below.
73,
Don W3FPR
On 10/21/2015 1:15 PM, Gordon LaPoint wrote:
I purchased a used KRC2 band decoder. Going through the tests in the
manual, it works with the buttons on the KRC2, but I can not get the
unit to communicate with my computer. I downloaded the software from
Elecraft, using Windows 7 or 10 and real serial ports (not
usb-serial). What am I doing wrong? or is the unit bad? I have not
hooked up the auxbuss to the K3 yet, wanted to make sure the bandmap
and serial port work first.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
