Hi Lyle Many thanks for the complete explanation. I'll give it a whirl.
Martin G0PJO Sent from my iPhone > On 28 Oct 2015, at 21:44, Lyle Johnson <[email protected]> wrote: > > Disable the mic buttons (see menu items) and use VOX (or a serial port > command) to switch between Tx and Rx depending on your program's features. > > And be sure to set MIG GAIN to ZERO then gradually increase it to get the 4-5 > bars of ALC indication. If the MIC GAIN is too high for the computer's audio > level, the ALC bar graph and the transmit audio levels may not respond > properly (this is a bug on my short list to fix). > > 73, > > Lyle KK7P > >> Good question...I have been holding the microphone infront of the PC speaker >> in the interim as that worked as a temporary solution. >> ... >> >> What is the easiest way to connect the KX3 to a computer for RTTY, PSK31 & >> SSTV... >> >> So how do you connect the audio for transmitting? > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
