Hi Scott,
I have the same problem and have not been able to solve it....
It worked perfectly for a few days and then it developed the symptoms you
described - plus the auto power select stopped working on the K3 (rig no longer
goes from high power to low power when the KPA500 is enabled). I will see what
suggestions you get.
I may need to send both back to Elecraft to have them look over the equipment.
73,
Bob/AA6VB
From: NE9U - Jasper <[email protected]>
To: "[email protected]" <[email protected]>
Sent: Friday, October 30, 2015 10:23 PM
Subject: [Elecraft] kpa500 doesnt follow k3
Just hooked a new kpa500 to a k3.
when switching bands on the k3, the kpa500 doesnt follow. it does follow when
i apply power.
the reverse does work....if i switch bands on the kpa500, the k3 follows.
tried 2 different auxillary cables...same result with both.
am i missing some setting i need to change?
scott ne9u
Sent from Republic Wireless Cray-1
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
