This post is for K2 builders that have the internal KAT2 ATU. I am completing a K2 build that will include the KAT2. The 2-pin connector (P6) on the K2 RF Board connects to the RF input on the KAT2. There is a clearance problem where inductor L20 overlaps the footprint of P6 on the RF board. This overlap is about 2 mm in my case. The recommended solution to this overlap is to simply unsolder L20 and roll it forward to eliminate this overlap. I am uncomfortable with this and am thinking about using an alternative method to make this connection. I'm interested in hearing from other K2 builders who may have used an alternative to P6 because of this interference issue.
73 Dave, K8AX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
