Try it on a dummy load. If it changes then it is a radio problem. If it
doesn't then it's external.
If you have used the radio with CAT control, sometimes the software
application will not close and exit correctly and will leave "crud" or
fragmented data in the radio and there's no telling what results may
appear.
73
Bob, K4TAX
On 11/15/2015 2:17 PM, Dennis wrote:
Don
I know that the preamp and attenuator settings are remembered per band.
However, if I am on 160M and turn the attenuator off, it turns itself
back on
within 2 seconds. If I am on 80M and I turn the preamp on, it will
turn itself off within a couple of seconds.
I'm trying to find an explanation for this other than an excessive
strong signal.
Dennis W1UE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
