I have a 50 kW BC station a few miles away. I had to make a HP filter
because of the IMD. But it was not strong enough to force the attenuator on!
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/
On 15 Nov 2015 22:22, Don Wilhelm wrote:
Sounds like you may have a strong AM broadcast signal that is
overwhelming the K3 input.
MW signals will be attenuated by the Low Pass Filter, but those signals
below 160m will not be.
The K3 does have some suppression of AM Broadcast band frequencies, but
it may not be sufficient in your case.
73,
Don W3FPR
On 11/15/2015 3:13 PM, Dennis wrote:
Joe
Yes, I can turn the attenuator off once I'm on 160M, but within 2
seconds of turning it off
it will turn itself back on.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
