I ran into this, and what I found is the connection to the reference K144VX
board was not good.(The center pin out on that connector had pushed out)
From: Richard Thorpe <[email protected]>
To: Elecraft List <[email protected]>
Sent: Saturday, November 28, 2015 11:36 AM
Subject: [Elecraft] 2meter off Frequency
I have a K3 with the 2 meter board it has the K144VX ref lock board and the
radio has the K3EXREF installed also installed are the KSYN3A boards. With all
these boards working the 2meter frequency is of by 5 kc. The only way I can
bring it back on frequency is by manually adjusting the frequency. Any ideas
as to what is causing this anomaly? Thank you.
Richard K6CG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
