I had a similar problem on my K3. Mine turned out to be plugging
the ref lock TMP cable into the wrong place on the new synth
board. It started working when I followed the cabling diagram on
the installation instructions for the new synth board.
<http://www.elecraft.com/manual/E740257%20KSYN3A%20Installation%20Rev%20A5.pdf>
page 15 and 16.
73 Bill AE6JV
On 11/28/15 at 8:36 AM, [email protected] (Richard Thorpe) wrote:
I have a K3 with the 2 meter board it has the K144VX ref lock
board and the radio has the K3EXREF installed also installed
are the KSYN3A boards. With all these boards working the
2meter frequency is of by 5 kc. The only way I can bring it
back on frequency is by manually adjusting the frequency. Any
ideas as to what is causing this anomaly? Thank you.
-----------------------------------------------------------------------
Bill Frantz |The nice thing about standards| Periwinkle
(408)356-8506 |is there are so many to choose| 16345
Englewood Ave
www.pwpconsult.com |from. - Andrew Tanenbaum | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
