One thing to check to make sure you don't have a cable plugged into the K3s Line In jack. If you do, that will shut off the signal from the USB audio interface. Cheers, Fred KE7X
For KE7X Elecraft books, see www.ke7x.com ________________________________________ From: Elecraft <[email protected]> on behalf of [email protected] <[email protected]> Sent: Tuesday, December 29, 2015 6:12 AM To: [email protected] Subject: [Elecraft] Ham radio Deluxe Merry new year to all. I am having trouble operating HRD psk31 to my K3s. I can set it up to receive via the K3s usb no problem. The tx is produced by the pc but not keying the K3s. I have tried all the settings in the manual. I also us the P3 all linked to the pc with the proper cables. Any ideas? Go cut . Keith Sent from Samsung Mobile ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
