The answer is yes. Actually a better answer is maybe.
The P3 will tune to the K2 IF frequency, but the K2 does not have an IF
output.
Clifton Laboratories used to have a Z10000-K2 buffer amplifier to bring
the K2 IF out to the rear panel without loading the K2 IF system,
however, Clifton Labs has closed shop and the buffer amplifier kit is no
longer available.
The documentation is still available on the website and the buffer amp
is not anything complex, so you may be able to build your own version of
the Z10000-K2 buffer amplifier.
Once you have an IF output from your K2, the P3 will provide the
spectrum display of the K2 IF without modification.
73,
Don W3FPR
On 1/14/2016 7:31 PM, Gee wrote:
Can I use my P3 with a K2? If so does it require a modification to either unit?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
