I wonder if it would work in fixed mode or just in tracking mode? I know the K2's CAT command set is a subset of the K3's. It would be interesting to hear from someone who's tried it.
Vic 4X6GP/K2VCO > On 15 Jan 2016, at 4:56 AM, Don Wilhelm <[email protected]> wrote: > > The answer is yes. Actually a better answer is maybe. > The P3 will tune to the K2 IF frequency, but the K2 does not have an IF > output. > Clifton Laboratories used to have a Z10000-K2 buffer amplifier to bring the > K2 IF out to the rear panel without loading the K2 IF system, however, > Clifton Labs has closed shop and the buffer amplifier kit is no longer > available. > The documentation is still available on the website and the buffer amp is not > anything complex, so you may be able to build your own version of the > Z10000-K2 buffer amplifier. > Once you have an IF output from your K2, the P3 will provide the spectrum > display of the K2 IF without modification. > > 73, > Don W3FPR > >> On 1/14/2016 7:31 PM, Gee wrote: >> Can I use my P3 with a K2? If so does it require a modification to either >> unit? > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
