Hi Bob:
You can just put the K3 in SEMI breakin mode (Press hold
QSK button on Band UP) and set the delay to whatever you
want by adjusting the DELAY (press hold SPEED MIC and turn
knob to adjust). I believe that should produce the result
you are seeking.
73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On 1/26/2016 10:21 AM, Bob McGraw K4TAX wrote:
One issue I'm trying to resolve is a manner to keep the
KEY OUT active in between CW elements. This of course
would negate QSK operation but the repeated clatter of an
external relay is most annoying.
Any help or suggestions?
73
Bob, K4TAX
On 1/26/2016 9:15 AM, Jim Miller wrote:
There is a Keyout to RF out default (adjustable) delay of
8ms on the K3.
What is the spec for RF out going inactive to Keyout
going inactive?
Thanks
Jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
