WOW! It works. Thank you........I'd missed that one. Geez, seems I
can or need to learn something every day. :-)
73
Bob, K4TAX
K3S s/n 10163
On 1/26/2016 9:35 AM, Ken K3IU wrote:
Hi Bob:
You can just put the K3 in SEMI breakin mode (Press hold QSK button
on Band UP) and set the delay to whatever you want by adjusting the
DELAY (press hold SPEED MIC and turn knob to adjust). I believe that
should produce the result you are seeking.
73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On 1/26/2016 10:21 AM, Bob McGraw K4TAX wrote:
One issue I'm trying to resolve is a manner to keep the KEY OUT
active in between CW elements. This of course would negate QSK
operation but the repeated clatter of an external relay is most
annoying.
Any help or suggestions?
73
Bob, K4TAX
On 1/26/2016 9:15 AM, Jim Miller wrote:
There is a Keyout to RF out default (adjustable) delay of 8ms on the
K3.
What is the spec for RF out going inactive to Keyout going inactive?
Thanks
Jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
