Irwin,
The K3S USB codec is no different than any other USB soundcard. Those do
have computer and OS dependencies that I cannot give specifics for. In
addition, how MMTTY interacts with your computer is another area that
must be looked at. You must tell MMTTY which soundcard to use. Then in
your Operating System, open the sound panel and set the sliders for
output to about 2/3 of maximum.
In the K3S, set MIC SEL to LINE and adjust the input level (MIC Gain
with LINE selected) to produce 4 bars solid on the ALC meter with the
5th bar flashing.
If you can achieve all that, you should be able to transmit RTTY with
the K3S in AFSK A data submode.
73,
Don W3FPR
On 2/12/2016 5:40 PM, Irwin Darack wrote:
I am in the process of setting up a second K3S that I just built and having
difficulties setting up RTTY using MMTTY
Using the USB Codec, I can key the rig, receive Audio in and copy RTTY, but
no Audio from the computer to the radio.
I have the correct speaker in the computer selected (USB Audio Codec) . In
the Config menu I show KIO3B and set to nor.
What am I missing - Not sure what to try next?
Thanks,
Irwin KD3TB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
