Thanks to everyone. Simple Operator error. I forgot to set the mic to Lin in for TX Data. That solved it.
Irwin KD3TB On Friday, February 12, 2016, Bob McGraw K4TAX <[email protected]> wrote: > You do have the speaker level at about 50% on the computer. In the > Windows 10 system I run, I right click on the speaker symbol in the tray, > then select Playback devices, then Speakers CODEC, the Properties then > Levels. The slider is sitting about mid scale or -10.2 dB or 50%. The > radio is in Data A mode. I set the MIC {actually Line level} to about > 20. This gets me 4 to 5 bars on the ALC scale. Then set the PWR value > for the number of watts you want out. > > Nothing is plugged in the rear panel audio connectors. I only use the USB > cable between the radio and computer. > > 73 > Bob, K4TAX > > On 2/12/2016 4:40 PM, Irwin Darack wrote: > >> I am in the process of setting up a second K3S that I just built and >> having >> difficulties setting up RTTY using MMTTY >> >> Using the USB Codec, I can key the rig, receive Audio in and copy RTTY, >> but >> no Audio from the computer to the radio. >> >> I have the correct speaker in the computer selected (USB Audio Codec) . In >> the Config menu I show KIO3B and set to nor. >> >> What am I missing - Not sure what to try next? >> >> Thanks, >> >> Irwin KD3TB >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] >> >> > > -- Irwin KD3TB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
