Thanks to some off list advice, I think I have tracked this
problem down. It doesn't appear to be RUMlogNG because it also
occurs with the K3 utility. (Note: I found thi problem before
communicating with Tom DL2RUM.) Here's my message to support
describing the problem:
When running the K3 utility (Mac version, but the problem might
also occur with Windows and Linux), with the terminal window
open, and having the P3/SVGA data display turned on, both the
P3/SVGA and the terminal window lose characters during RTTY
decode. The correct characters appear on the K3 display.
Turning P3/SVGA data display off clears up the characters in the
terminal window, and switching to one of the other windows in
the K3 utility clears up the problem with the P3/SVGA.
Simular problems occur using RUMlogNG's contest mode for RTTY.
Given the easy workaround, this problem isn't super high
priority, but if it will be with us for a while, people should
learn about the workaround.
73 Bill AE6JV
-------------------------------------------------------------------------
Bill Frantz | The first thing you need when | Periwinkle
(408)356-8506 | using a perimeter defense is a | 16345
Englewood Ave
www.pwpconsult.com | perimeter. | Los Gatos,
CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
