It acts that way because it IS that way, if the K3 internal tuner is activated.
Vic 4X6GP > On 22 Feb 2016, at 2:29 AM, Joel Black <[email protected]> wrote: > > Deane, > > I have discovered the same. It kind of acts like an SWR meter put *after* a > tuner. > > If I use a resonant antenna or transmit into my dummy load, I don’t get these > squirrelly readings. > > 73, > Joel - W4JBB > >> On Feb 21, 2016, at 6:23 PM, Deane Walkington >> <[email protected]> wrote: >> >> I have recently installed the Txmon and have seen some peculiar Power and >> SWR readings on the P3 Display. Power levels much higher than the K3 is set >> to and SWR readings much higher (10:1) than the K3 indicates (typically >> 1.2:1). I connected the Coupler to the K3 ANT 1 socket via a short coax >> patch cable. What is the preferred method of connecting the Coupler - a UHF >> male to male adaptor or a short length of coax? At present I have >> disconnected the coupler from the radio and the P3. >> >> >> >> Dean >> >> VK1DW >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
