Hi Don,
Yes, I just seen that in the manual as your e-mail came into my system. Now
I have to locate my probe.
72 and Thanks,
Ron Polityka
WB3AAL
www.wb3aal.com
www.n3epa.org/
K1 - SN 01011
K2 - SN 01392
----- Original Message -----
From: "Don Brown" <[EMAIL PROTECTED]>
To: ".Elecraft" <[email protected]>; "Ron Polityka"
<[EMAIL PROTECTED]>
Sent: Wednesday, February 22, 2006 8:38 PM
Subject: Re: [Elecraft] CAL FIL
Hi
Do you have the frequency counter probe connected to the BFO test point.
If you do, does the frequency counter work when you connect it to the
4.000Mhz oscillator on the control board. If not then you have a problem
with the frequency counter on the control board. Possibly low gain on Q9
and Q10. If you just forgot to plug in the counter probe then that is your
problem.
Don Brown
KD5NDB
----- Original Message -----
From: "Ron Polityka" <[EMAIL PROTECTED]>
To: ".Elecraft" <[email protected]>
Sent: Wednesday, February 22, 2006 7:12 PM
Subject: [Elecraft] CAL FIL
Hello,
Hope someone can help me with a problem I am having trying to set my CAL
FIL settings.
I am using the N0SS program and I have looked in my K2 manual and the one
on
line. I have Processor 2.01H version and I/O Controller 1.02 version.
I basic K2 for QRP operation without 60 meters.
I can't seem to enter the new value of the CAL FIL that I want to keep. I
get a INFO 230 which is BFO is not connected to freq. counter.
I know I am missing something but I just can't place my finger on it.
When I go and set my FL1 and hit the XFIL button all 000000 come up and
then
InFO 230 shows up.
Any help would be grateful, thanks in advance.
72 and Thanks,
Ron Polityka
WB3AAL
www.wb3aal.com
www.n3epa.org/
K1 - SN 01011
K2 - SN 01392
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
