Hi all, Is there a procedure where I could check the K2 thermistor board for proper operation once soldered in? I just passed that step in my second K2 build, and I'm uncertain about one of the pins - it rocked out of place while I was soldering it to the RF board, but of course it's now soldered in. It's not just in there but it's IN THERE hi hi and I'd like to check it before tearing it up trying to pull it out of the board.
Visual inspection still shows the makeshift pin in place, but I'd just like to do some kind of measurement or continuity at the RP3 location just to be sure. Thanks es 73, LS W5QD -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-thermistor-board-check-tp7615784.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
