Mark,
The proper answer is "maybe".
Check the audio amplifier for the speaker by plugging your headphones
(or external speakers) into the speaker jack in the back of the K3.
If you have audio there, the speaker amplifier is working and there is
not a problem with the DSP board or Front Panel board.
If you do get audio through the rear speaker jack, then check that you
have the internal speaker plugged in completely and correctly.
73,
Don W3FPR
On 4/4/2016 10:41 PM, [email protected] wrote:
Good Evening,
This is mark griffin, KB3Z. I forgot to write the message in text. Here we go
again!!! I installed my KDVR a few months ago. And for some reason the internal
speaker does not work. It has been suggested that I don't have the DSP board
seated correctly or perhaps the front panel is not seated correctly. When I
plug headphones into the headphone jack I get audio into the headphones. Also,
the KDVR works also. Would the KDVR still work even though the DSP board or
front panel may not be seated correctly? Thanks for any advice I receive. Mark
Griffin, KB3Z
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
