Enrico, How old is your K3? I believe they made a change to increase the output on the "newer" units. I'm not sure which serial number this began on, but mine has the higher output, and it is serial number 43XX.
73, Art WB8ENE On Thu, Apr 7, 2016 at 3:55 PM, Enrico Lorenzoni IU3AZC <[email protected]> wrote: > hello everyone, > I just compared my k3 with a friend's one and my IF out is much lower than > his k3. > I suspected it when listening on a softrock, but now I can see a > difference like 10 or 20db off. > > So I inspected my k3 and the IF out connector is fine. Multimeter says 0 > ohms between bnc contacts and P86 pins on motherboard. > What can I check next? > Anyone did fix this same issue? > > thanks > > Enrico IU4AZC > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
