Bruce,
I always operated mine at 5 watts. The K2/10 has a large heatsink area.
You may want to try even higher than 5 watts - if you want to check to make
sure it is OK, feel the bottom rear panel of the K2 enclosure. It will
be warm,
But you should still be able to hold your fingers on it. If it is too
hot to
touch continually, it is too hot.
73,
Don W3FPR
On 4/24/2016 12:37 AM, Bruce Rattray wrote:
What is the safe level to operate the K2 at for the PBSK31 mode? I'm
thinking 2 or 3 watts. tnx 73 Bruce ve5rc
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
