Phil and all,
Yes, those mods can do a lot for temperature stability of the K2. Adjust
the Thermistor board RA value if necessary to achieve the best stability.
The KX3 can achieve good temperature stability if the Extended
Temperature Compensation procedure is completed - I would not attempt
any of the JT data modes without doing that first.
73,
Don W3FPR
On 4/24/2016 7:28 PM, Phil Wheeler wrote:
I've done all those mods to #380, Don. I didn't realize they were that
effective! And after reading of thermal stability issues some have
had in JT65 (e.g., using a KX3) I assumed the K2/10 would have even
larger issues in those modes, given the age of the design.
Your message is good news indeed!
73, Phil W7OX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
