I don't think the "bypass" in the KAT3 is a true bypass. It sets a "solution" which should be equivalent to a bypass.
The new KAT3a has a true "bypass" relay. Sent from my iPhone ...nr4c. bill > On May 6, 2016, at 11:50 AM, Ramon Tristani <[email protected]> wrote: > > The VSWR indication in my K3 seems to be off considerably when connected to a > 50 ohm dummy load. An external VSWR meter indicates 1:1 while the K3 most of > the time indicates readings varying up to 2:1 at times. I am using the same > short coax stub to connect the instruments one at a time to eliminate other > possibilities. Is there a way to “calibrate” the VSWR indicator in the K3? My > K3 is serial number 4416. The Auto Tuner in it works fine and reduces the > indication to 1:1 as it is supposed to but when bypassing it the VSWR > indication will always be off. Any suggestions? > > > Ramón E. Tristani Sr. > [email protected] <mailto:[email protected]> > https://www.flickr.com/photos/nq9v/ <https://www.flickr.com/photos/nq9v/> > www.tristaniministries.org <http://www.tristaniministries.org/> > www.tristaniphotography.com <http://www.tristaniphotography.com/> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
