Count me in - great idea! Mike - W0AG
On Thu, May 12, 2016 at 2:36 PM, Bob Novas <[email protected]> wrote: > I'm really interested in the KPad, but specifically for use with the P3. > The > K3/K3S already has a nice knob! I like to use the P3's knob to tune to a > signal and then push the P3 knob in to set the K3S receiver to that > frequency. Most of the time I can very accurately hit as SSB signal, if I > turn the P3 knob to the correct side of an SSB signal and simply assume > that > the carrier is at xxx0.0 kHz. But the P3 knob is small and that makes this > hard to do. I think it would be great if you could do this with the KPad > knob, and one of the KPad buttons. > > > > But, I called Elecraft and spoke to tech support and they said the KPad > wasn't being programmed to work with the P3, but that this reflector was a > great place to post feature requests. Do any others want to chime in and > request this feature? Thanks, Bob - W3DK > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
