I’m trying to set up a K3S with N1MM+ and am having problems with the TX audio. I have connected the K3S via USB to my windows PC and with Audacity have proved that I can receive audio over the USB connection using the built-in soundcard in the K3S. However, I cannot make it go in the other direction - ie get the K3S USB soundcard to modulate the output.
My desire is to get N1MM+ to be the voice keyer. I have got a headset plugged into the 3.5mm sockets on the rear of the K3S. This works. When I ask N1MM+ to transmit audio, then the K3S goes into TX. However, I cannot heard the computer generated audio in my headset - all I can hear is my own breathing into the headset mic (hence proving that that the monitor function works). Also, no RF is going out. MAIN:MIC is set to RP, MAIN:MIC+LIN is set to ON. Am incorrectly assuming that I can use the K3S soundcard in this way? If not, what am I doing wrong! 73 Paul M1CNK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
