Number 1 is already there - unless you "DEMAND " that you do WHILE the computer is sending CQ or whatever . Just press WIDTH to select I or II . K7HP ----- Original Message ----- > I'm not sure if this is on the list of requested firmware features, so > I'll > mention it here just in case: > Request 1: I'd like to be able to adjust the RX filter shift/width > while > transmitting. I often take a moment to assess things like passband, > RIT, > etc. when CQing during a contest, and if I'm extensively using the > narrowest filter/shift to dig out weak signals, I like to revert to a > wider > passband for the next QSO. While I know I could do this using a CAT > command, I'd like to be able to do it using the knob. > Request 2: After using a Flex Maestro there is one clever feature that > I > think the K3 could incorporate via a small firmware change. The > Maestro > has a front panel knob that adjusts the AGC threshold. I find this > useful > because in some band conditions turning the knob feels like it makes a > big > improvement (different signal levels, static, etc.). I'd like to > request > that one of the K3's front-panel encoders be optionally made to adjust > AGC > threshold. Perhaps VFOB or the RIT knob -- perhaps both RIT and XIT > lights > could come on when that knob was in AGC THRESH mode. (maybe a knob on > the > K-Pod could be assigned to this as well... I don't own one yet). > 73, > Matt NQ6N > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
