Regarding a front panel knob for AGC threshold adjustment, I have
assigned AGC Threshold and Slope as keyswitch macros to M1 tap & M1 hold
respectively. Then it's just a matter of selecting either and turning
VFO A to adjust.
73,
Drew
AF2Z
On 06/08/16 17:23, Matt Murphy wrote:
I'm not sure if this is on the list of requested firmware features, so I'll
mention it here just in case:
Request 1: I'd like to be able to adjust the RX filter shift/width while
transmitting. I often take a moment to assess things like passband, RIT,
etc. when CQing during a contest, and if I'm extensively using the
narrowest filter/shift to dig out weak signals, I like to revert to a wider
passband for the next QSO. While I know I could do this using a CAT
command, I'd like to be able to do it using the knob.
Request 2: After using a Flex Maestro there is one clever feature that I
think the K3 could incorporate via a small firmware change. The Maestro
has a front panel knob that adjusts the AGC threshold. I find this useful
because in some band conditions turning the knob feels like it makes a big
improvement (different signal levels, static, etc.). I'd like to request
that one of the K3's front-panel encoders be optionally made to adjust AGC
threshold. Perhaps VFOB or the RIT knob -- perhaps both RIT and XIT lights
could come on when that knob was in AGC THRESH mode. (maybe a knob on the
K-Pod could be assigned to this as well... I don't own one yet).
73,
Matt NQ6N
______________________________________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
