I am thinking of getting a 2nd DCHF Coupler for my P3 TX Monitor Setup. This way I could Monitor 2 Outputs from the same P3. Currently I have a coupler right after my main linear via Ant 1 on the K3, but want to add a second coupler to the output of the KPA500 via Ant 2 on the K3. I then could switch between the outputs and use the same P3. I realize I can only use 1 coupler at a time, but changing cables etc out all the time would be a pain. Does anyone know of a switch that could handle this job. I have done a search on the internet and eBay and found nothing that would mate up to a RJ8 Connector which the TX Monitor and Couplers use. If any one is doing what I am contemplating I would like to hear from you. Tnx.
73 De Mike VE3YF http://www.ve3yf.com [http://www.ve3yf.com/] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
