>From the P3 manual: Using Multiple Sensors
If you wish to use more than one sensor with the P3, such as separate sensors for HF and VHF, you must switch the sensor cable to the active sensor as needed. A convenient way to do this is to use an external RJ45 switch that allows you to select the desired sensor. A suitable four-way switch box with RJ45 female connectors made by Sanoky Network 1 Input 4 Output RJ45 8P8C Manual Sharing Switch available on various on-line web sites. Others are the GadKo RJ45 switch box or the Electro Standards 8079 RJ45 A/B switch box. You will need an extra sensor cable with male RJ45 connectors to attach the switch box to the P3. A suitable 6-foot W2 Sensor Cable available from Elecraft (Order E850638). 73, Ron AC7AC -----Original Message----- Subject: Re: [Elecraft] P3/TX Mon Coupler Switching Idea > I am thinking of getting a 2nd DCHF Coupler for my P3 TX Monitor > Setup. This way I could Monitor 2 Outputs from the same P3. ... > Does anyone know of a switch that could handle this job. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
