Joe- replies embedded at dashes in italics What softwareare you using for FSQCALL? I see atleast three programs
that supportFSQ mode. -- usingFSQCALL v0.36 by ZL2APF What are thePTT settings in your software? - settings inPTT/Cat settings are com14 --00,kenwood(oldermodels) -- Use PTTIs your software trying to do hand shake on the CAT Port and asserting RTS on the CAT Port as soonas the software starts?--- Not sure how to check that? What PTToptions are enabled in microHAM Router? -- com11 forRTS (same port as for CAT) Is"Sound card PTT" checked in microHAM Router -- on PTT tab, Sound card PTT is checked and does your software open thesound card for transmit as soon as it starts?-- yes when FSQCALl opens, the icon for it opens in Windows Volume Mixer Do you have"Use Q-CW" or "Use P-FSK" checked in microHAM Router -- No and does yoursoftware generate audio on the *right* channel of the sound card? -- when Iopen the program and it puts K3 in tx, there is no audio showing in rightchannel 73Paulkc2nyu ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
