On 6/28/2016 5:20 PM, paul ecker via Elecraft wrote:
Joe- replies embedded at dashes in italics
This list is *text only.* HTML formatting is stripped by the
mailing list software. Please properly quote and embed your
replies (as below) so those trying to answer/help you can not
only find your replies but understand to what you are replying.
Is"Sound card PTT" checked in microHAM Router
-- on PTT tab, Sound card PTT is checked
*UNCHECK* "Sound card PTT"
does your software open the sound card for transmit as soon as it
starts?--
>
yes when FSQCALl opens, the icon for it opens in Windows Volume
Mixer
That's gutter (lazy) programming. The sound card output endpoint
should be opened when the program switches to transmit and closed
when the program returns to receive.
"Sound card PTT" relies on the internal flag (which is bought out
to a status pin on the CODEC chip) that indicates whether the end-
point is open or closed in order to generate PTT. *DISABLE* Sound
card PTT by unchecking the box in microHAM Router (PTT Tab).
Please refer to the Users Manual for your microHAM interface.
73,
... Joe, W4TV
On 6/28/2016 5:20 PM, paul ecker via Elecraft wrote:
Joe- replies embedded at dashes in italics
What softwareare you using for FSQCALL? I see atleast three
programs
that supportFSQ mode.
-- usingFSQCALL v0.36 by ZL2APF What are thePTT settings in your
software? - settings inPTT/Cat settings are com14
--00,kenwood(oldermodels) -- Use PTTIs your software trying to do
hand shake on the CAT Port and asserting RTS on the CAT Port as
soonas the software starts?--- Not sure how to check that? What
PTToptions are enabled in microHAM Router?
-- com11 forRTS (same port as for CAT) Is"Sound card PTT" checked in
microHAM Router -- on PTT tab, Sound card PTT is checked and does
your software open thesound card for transmit as soon as it starts?--
yes when FSQCALl opens, the icon for it opens in Windows Volume Mixer
Do you have"Use Q-CW" or "Use P-FSK" checked in microHAM Router
-- No
and does yoursoftware generate audio on the *right* channel of the
sound
card?
-- when Iopen the program and it puts K3 in tx, there is no audio
showing in rightchannel 73Paulkc2nyu
______________________________________________________________
Elecraft mailing list Home:
http://mailman.qth.net/mailman/listinfo/elecraft Help:
http://mailman.qth.net/mmfaq.htm Post:
mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this
email list: http://www.qsl.net/donate.html Message delivered to
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
