Don, 

I was looking at the LP-PAN YouTube video where they demonstrated noise 
reduction that made weak dx signals audible on the K3S where they were not 
audible without the LP-PAN.  Is this really the case?

John
WA1EAZ

Sent from my iPhone

> On Jul 4, 2016, at 11:46 AM, Don Wilhelm <[email protected]> wrote:
> 
> John,
> 
> NaP3 can play through the computer speakers to act as a 2nd receiver (but 
> there will be latency dependent on the computer). That is where the NaP3 NB 
> is useful.
> 
> I do not understand that a NB function would be valuable on the spectrum 
> display.  I want to see the noise sources that may interfere with my 
> reception just the same as I want to see the signals on the band.
> 
> 73,
> Don W3FPR
> 
>> On 7/4/2016 11:31 AM, John Stengrevics wrote:
>> Don,
>> 
>> LP-PAN advertises noise reduction.  Does the P3 do similar?
>> 
>> John
>> WA1EAZ
>> 
>> Sent from my iPhone
>> 
>>> On Jul 4, 2016, at 11:27 AM, Don Wilhelm <[email protected]> wrote:
>>> 
>>> Bill,
>>> 
>>> The least frustration route is to use the P3 with the SVGA option (and 
>>> perhaps the TXMON option).
>>> 
>>> Certainly the LP-Pan/NaP3 or Win4K3 route will be less expensive, but 
>>> requires getting the applications working right on the computer.
>>> 
>>> So the tradeoff is between using the hardware solution of the P3 vs. using 
>>> LP-Pan/NaP3 which involves computer setup of the soundcard and all the 
>>> attendant frustration that comes with getting everything to play together.
>>> 
>>> If I had a MM station, I would go for the P3, but if you have enough 
>>> patience to work with the LP-Pan?NaP3 solution, the end result will be 
>>> similar.
>>> 
>>> 73,
>>> Don W3FPR
>>> 
>>>> On 7/4/2016 8:25 AM, Bill OMara via Elecraft wrote:
>>>> I'm looking for some input on the best and most cost effective way to add
>>>> panadapters to my MM contest station with four K3's.
>>>> 
>>>> I currently have one of the four station outfitted with a LP PAN2 and NaP3
>>>> SW and it works fine with the internal sound card with 48Khz bandwidth.
>>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[email protected]
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to [email protected]
>> 
> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to