The DB9 connector on the K2 is NOT a standard RS-232 port.
I believe there is a wiring diagram for the necessary cable in the KIO2 and KPA100 manuals.
You may have dodged a big bullet. On 7/7/2016 5:38 PM, PHILIP GRAITCER wrote:
I got the K2 out for Field Day and it performed great! I’d never used the K2 with a computer, so I hooked it up and set up N1MM for the contest. I was unable to get the function keys to operate and N1MM was a little unstable, sometimes locking up. I was able to log contacts, but couldn’t send code. This isn’t the case when I use the same setup with my K3. I’m thinking that there are incompatibilities between the K2 and N1MM, probably due to the age of the K2. But I am not very capable with computers. Any suggestions? Phil ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
