Phil,
First, set the baud rate at 4800bps - that is the maximum speed of the
K2 (the K3 can go to 38400 baud).
Did you test the setup before Field Day? If it worked OK during that
pre-FD testing, all the settings should have been correct.
Not getting *all* the settings correct in the software is one of the
"bug-a-boo's" in the computer/transceiver world. There are just too
many combinations and permutations to give a single answer to your problem.
N1MM should fully support the K2 - I am not going to go into details
about N1MM configuration settings, I will leave that for others.
There are many happy K2 owners out there using N1MM.
73,
Don W3FPR
On 7/7/2016 6:38 PM, PHILIP GRAITCER wrote:
I got the K2 out for Field Day and it performed great! I’d never used the K2
with a computer, so I hooked it up and set up N1MM for the contest.
I was unable to get the function keys to operate and N1MM was a little
unstable, sometimes locking up. I was able to log contacts, but couldn’t send
code. This isn’t the case when I use the same setup with my K3.
I’m thinking that there are incompatibilities between the K2 and N1MM, probably
due to the age of the K2. But I am not very capable with computers.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
