This is a nice macro, but it's mostly a patch for a long-standing firmware bug - namely that, on returning to a data sub-mode on any particular band, the IF center frequency and bandwidth have often been changed to something quite inappropriate.
This is because the K3 firmware failed to include the center frequency and bandwidth among the data sub-mode parameters that are memorized per-band. As a result, those settings are always being overwritten by the last settings used on some other band - quite possibly for some other, unrelated data sub-mode. Many years have passed since Elecraft acknowledged that this was an oversight... but it never was fixed, so the same problem has propagated into the K3S, and very probably into the KX3 and KX2 as well. 73 from Ian GM3SEK >-----Original Message----- >From: Elecraft [mailto:[email protected]] On Behalf Of Bill >Frantz >Sent: 11 July 2016 18:28 >To: Elecraft Reflector >Subject: Re: [Elecraft] Now that the K-Pod is shipping, we could use your >help with useful macros > >There was a bug in my RTTY macro. The latest version is: > >RTTY: MD6;DT1;IS 2210;BW0040 > >Goes to Data mode and then AFSK A. Sets the filter center to >normal (2.21 KHz) and the bandwidth to 400 HZ. > >Old version was: > >>RTTY: MD6;DT1;IS 9000;BW0040 > >73 Bill AE6JV > >----------------------------------------------------------------------- >Bill Frantz | Ham radio contesting is a | Periwinkle >(408)356-8506 | contact sport. | 16345 >Englewood Ave >www.pwpconsult.com | - Ken Widelitz K6LA / VY2TT | Los Gatos, >CA 95032 > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
