Good advice from Charlie, K3ICH. Check the following website: www.asciitable.com/index/extend.gif
Scroll down to "Extended ASCII Codes" Hold the "ALT" key and type the three-digit number on the right-hand-side number pad on a standard keyboard (not the numbers across the top of the keyboard - I have not yet figured out how to access the number pad on the reduced-size laptop keyboard). Good idea to print the section. Very useful for tech- and language-writing in WORD. Cheers, Alan V31FA On Sat, Jul 16, 2016 at 11:02 AM, Charlie T, K3ICH <[email protected]> wrote: > Instead of typing out "lambda", just hold down the "ALT" key and type 955 > = λ > > Same for : > Alt 171 = ½ > Alt 172 = ¼ > Alt 0216 = Ø > Alt 227 = π > Alt 234 = Ω > > There's lots more where those came from... > > 73, Charlie k3ICH > > -----Original Message----- > From: Elecraft [mailto:[email protected]] On Behalf Of Hank > Garretson > Sent: Saturday, July 16, 2016 12:38 PM > To: Elecraft Reflector <[email protected]> > Subject: Re: [Elecraft] Power Supplies > > Counterpoises are good. > > Also very helpful is to adjust total length of flattop and feedline to be > an odd multiple of Lambda/4 for the bands of interest. This keeps max RF > voltage peaks out of the shack. Not always convenient to do if you want > multiple bands. > > 73, > > Hank, W6SX > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
