William,
Are you reading the K2 display correctly when you do a TUNE?
Normally the K2 displays the power on the left and the SWR on the right.
The power is normally 20 watts and the SWR will be shown as 2 digits
(1.0 through 9.9).
In other words, you will see something like "20 1.0".
If the KPA100 wattmeter is not indicating properly, it may be that
diodes D16 and D17 have become damaged, or it may just be that the
wattmeter needs to be balanced and calibrated.
73,
Don W3FPR
On 7/20/2016 12:33 PM, [email protected] wrote:
Hi group,
Perhaps it's a silly question, but i don't understand something.
I have a K2 100 watt but I don't think any other set will make a deferens.
the set is connected to a tuner (AT-100Pro LDG) and it tunes as far as I can
see ok.
But now what I notice, when I tune the tuner tunes to swr 1.1 so that seems
to be ok, but my K2 gives me 2.0 1.
Does that mean my K2 sees a swr from2.0 whil my tuner says it is 1.0 ??
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
